How Are F1 Tracks Maintained?

The formula 1 race teams will not perform at their best if the race tracks are not kept up to the high standards required by the FIA. So what does it take to keep an F1 track maintained?

Resurfacing the track, securing safety barriers, sweeping run-off areas, test signal displays and repainting the track markings all form part of a Formula 1 race circuit maintenance. The track will be swept before every practice and race session on race weekends.

The track maintenance starts weeks before a Formula 1 race is scheduled. Everything needs to be up to the highest standard for the top tier of racing that will be taking place at the race track.  Read on to discover what maintenance happens behind the scenes at a Formula 1 race track. 

If you’re looking for some F1 merchandise, check out the awesome stuff at the official F1 store here.


How Are F1 Race Tracks Maintained

The FIA (Federation International de l’ Automobile) grades racing circuits from 1 to 6, and a grade 1 level is required to host a Formula 1 race. A race circuit with a grade 1 rating will be required to have several points that will need approval by the FIA, and this includes track maintenance.

Track maintenance can be divided into two groups, extensive and pre-race maintenance:

  • The extensive maintenance will have to be completed 90 days before a Formula 1 Grand Prix is scheduled and must be approved by the FIA.
  • Pre-race maintenance is the final preparation needed to be done to the track before and on a race weekend.

What Does The Extensive Track Maintenance Entail

The extensive maintenance will result in the race circuit being closed for a prolonged period for track repairs or a complete redesigning of track sections.

Track Resurfacing

In formula 1, the car’s performance is only as good as the grip that it gets from the track surface. The more grip available, the faster the car can go around corners, and the later or harder the driver can apply the brakes.

A track surface is under constant strain from the enormous forces that the car produces, and the track has to withstand the heat from the tires as they can exceed 120°C.  With all these stresses, the track surface must hold together, as any small stone that is kicked up can damage a race car traveling over 170mph.

The track surface or tarmac will need to be resurfaced every 10 to 15 years or when major track changes are scheduled. The asphalt consists of 3 layers totaling 6-10 inches, and the Bitumen used is of the highest quality.

The track surface must be flat and free of bumps, as this could cause a car to lose grip. The overall grip test must have a rating of 70 or higher; this is done by having the pendulum swing over the surface while lightly scraping it. The quicker the pendulum stops, the more grip the surface offers.

Cracks And Potholes On The Track Surface

In the case of a severe crack or a pothole that is busy forming, only the damaged section of the track will be cut out and resurfaced. The track team must take special care to ensure that there is no change in the transitions from the old to the news section.

Repairing Of Curbs

The curbs take a lot of impact from the car tires, and as they are slightly raised, this force can cause cracks and small chunks to break off.  Damaged curbs will need to be repaired and repainted as this could cause damage to the tires or underbody of the car.


Pre-Race And In-Race Maintenance

The pre-race maintenance is the final step to get the track ready to be raced on, but the maintenance will continue throughout the race weekend.

Track Markings

A race circuit has various painted markings and can often resemble an airport taxiway. There is good reason for all the markings, as they show the track limits, DRS zones, marshaling points, and pit lane entrance/exits. The markings must be a minimum of 10cm wide and must be painted in textured paint so that grip is not lost when a car drives over them.

The markings will be repainted before the Grand Prix weekend as the starting grid for the Formula 1 format requires a distance of 8 meters between race cars instead of the 6 meters for all other racing classes.

Run-Off Areas And Gravel Traps

Cemented or asphalt run-off areas prevent the driver from losing control of the car if they leave the track. These areas are sometimes set at a slight gradient to assist with braking. The run-off area will be pressure washed to remove any oil or debris so that cars returning to the track do not contaminate the racing surface.

Gravel traps are there to catch the car and slow it down before the barriers. The gravel trap is recessed 20mm from the track for the car to settle into the sand gradually. The gravel consists of small stones and pebbles ranging from 6-20mm as it needs to drain quickly in wet conditions. Gravel traps are combed or raked to ensure the surface is loose and level.

Barriers And Tire Walls

Barriers and tire walls are there to slow down and absorb the impact of a car in the event of a crash. The Armco barriers need to be replaced after most impacts but are inspected regularly.

Tire walls are made up of used tires strapped together and have a rubber wall in front of them.

These barriers are reset after impact and can be used multiple times. They are regularly inspected, as any loose tires will scatter and not be able to absorb impact in a crash.

Track Cleaning And Sweeping

The track surface will need to be steam pressure washed to remove all debris, excess rubber, and fluids to maximize grip and safety for the cars.  On average, 3 sweeping/cleaning trucks clean the track in less than 15 minutes. But, this is track-dependent.

Timing Equipment, Signal Lights, And Electronic Display Boards

All timing sensors built into the track must be tested, as this allows the position of the cars and the lap number to be displayed to multiple sources. The signal lights and displays are placed at the marshaling points and the start/finish line and will need to work in sync with each other. 

Light bulbs or LEDs will be replaced if not working correctly, and lenses and display boards are kept clean so that they are clearly visible to the drivers.


Conclusion

The maintenance done at Formula 1 race tracks is essential to the safety and productive outcome of the event. The track surface is a major part of the maintenance but is not the only part that requires attention.  The barriers, run-off areas, and signaling equipment all need to function optimally for a successful event.


References